Concrete grinding disc for angle grinder is an abrasive tool designed for grinding and smoothing concrete surfaces. Buteo grinding discs for concrete such as floor grinder diamond disc typically features diamond or abrasive segments and attach to grinding machines for surface preparation, coatings removal, and concrete polishing in construction and renovation projects. From 100mm floor grinder diamond disc, 115mm grinder concrete disc to 180mm, we have sufficient stock and timely delivery to ensure that your needs are met quickly and with high quality.
Specification of Grinder Disc for Concrete
Customized Process of Concrete Grinding Disc for Angle Grinder
Some customers may have special size requirements that may exceed the scope of standard specifications.
In order to meet these special needs, customers need to customize the concrete floor grinding disc for angle grinder to ensure that it can perfectly adapt to specific equipment and application scenarios.
During the customization process, you must confirm the size with us in detail to clarify the specific parameters such as inner hole diameter, outer diameter, thickness, etc.
Only through sufficient communication and confirmation can we accurately produce customized concrete grinding discs grinding blade that meet your requirements to ensure their performance and reliability in actual use.
Maintaining Cement Grinder Disc for Optimal Lifespan
01
Proper Storage
Store the grinding discs for concrete in a dry and cool environment to prevent exposure to moisture and extreme temperatures, which can degrade the bond and diamond segments.
02
Regular Cleaning
Clean the cement grinder disc after each use to remove dust, debris, and residual materials. Use a brush or compressed air to prevent buildup.
03
Check for Wear
Inspect the concrete grinder disk for signs of wear and tear, such as worn-down diamond segments or uneven wear patterns. Replace the disc if necessary to maintain efficient grinding.
04
Balancing
Periodically check the balance of the disc on the grinder. Imbalanced discs can cause vibrations and reduce both the disc's lifespan and the quality of the grinding.
05
Proper Usage
Follow the wall cutting blade manufacturer's guidelines for usage, including the recommended RPM (rotations per minute) and pressure. Using the concrete grinder disc within these specifications prevents overheating and premature wear.
Case Sharing: 115mm Concrete Grinding Disc, Grinding 10,000 Square Meters, Weight Loss Error ≤ 5 Grams
We select 98% concentration diamond powder (40/50 mesh) with high temperature pressurized phenolic resin, press at 12MPa at 230℃±5℃, and verify the crystal orientation degree> 92% through X-ray.
We test the sintering density every 20 minutes (error ±0.05g/cm³), and use a laser thickness gauge to dynamically calibrate the 3.2mm substrate flatness (±0.01mm) - this allows us to achieve a batch scrap rate of <0.7%.
In a project in Shenzhen, China, our concrete grinding disc 115mm worked continuously for 138 hours, and after a single disc completed 10,586 square meters of grinding, the actual weight loss was 4.6 grams, and there was no delamination or block falling during the whole process.
